Finding Your Ring Size

by Lewis Fausett on May 11, 2018

One of the most important steps when shopping for a ring is finding your ring size. This is important so that you can make sure you get a ring that fits! Here at Patrick Adair Designs all of our rings are sized in US ring sizes. 

There are three different ways we recommend to find your ring size. 

#1: Use a Ring Sizer to Find Your Ring Size: 

The PAD Ring Sizer is the quickest, easiest, and cheapest way to find your ring size. These ring sizers correspond to all the official Patrick Adair Design rings meaning this is the most accurate way to find your ring size.

Each ring sizer costs $10 but includes a $10 gift card. Meaning it is free to buy a ring sizer to help you make your first purchase. 

The PAD Ring Sizers are extremely easy to use. You just wrap it around your finger and put the end through the loop. You then sinch it till it is comfortable. You don't want it to be too tight or too loose. I also highly recommend you make sure it can be slid on and off your finger comfortably. 

 

PAD Ring Sizer | How to find your ring size

 

#2: Visit a local Jeweler: 

We highly recommend visiting a local jewelry store to confirm your ring size. This process is usually free and is the most accurate way to get the correct size!

Jewelers usually offer this free of charge because they want to make sure that their customers know what size to look for. It is always good to visit multiple jewelers to make sure you know your size. 

#3: Find your ring size at home with a string: 

If you're unable to visit a jeweler and don't have $10, it is very simple to find your ring size at home. All you need is a ruler and a piece of string and to follow the 3 simples steps below, and you can find your ring size at home. 

DISCLAIMER: The string method is not the most accurate way to find your ring size. We highly recommend finding your ring size with options #1 or #2 as those tend to be the most accurate/reliable.

Steps to Find Your Ring Size

1. Wrap the string around your finger and mark where it begins to overlap. 

2. Straighten the string out and measure it with a ruler. This is the circumference measurement of your finger. 

3. Compare this with our ring sizing chart!

 




55 comments
by Paparas on May 10, 2019

These are the awesomest rings that ever existed! Thank you so much infinity rings

by Dallin Hansen on April 29, 2019

Your ring’s are all really cool but have you considered trying touse damascus steel and have a wood inlay?
(I Would suggest using Purple Heart or Wenge.) Then coat it in an apoxie resin and sand to 1000 grit, then polish with whatever seems fit. Again just a suggestion of what to do for a YouTube Video. Good luck!!!

by David on April 23, 2019

Just kind of curious have you ever did a two-tone glow ring maybe with meteorite pieces in it on the inside glows red and the outside glows blue just kind of curious if you’ve ever done anything like that approximately how much would it cost I think I wear I think I wear a size 13 or 13 and a half I do not know for sure thank you

by Da zavage boi on April 16, 2019

Love da vids man keep up the awesome work. I make simple rings out of hex nuts and bearings.i hope you see this and keep making good vids like you always do.

by Cheerier on March 18, 2019

Keep up the good craftmanship and I’ll keep sending buyers your way. Free of charge lol.

by Hedley on March 03, 2019

Hi Guys,

Firstly….love the work! I am particularly interested in the Meteorite rings. I have a couple of questions to put to you before I commit to an order:

1. I am not a huge fan of “thick” rings. Is there a minimum thickness to a meteorite ring? When I order I can share a picture or tow of the ring(s) I currently wear.

2. Does the Meteorite need special care and attention? (polishing, cleaning, protecting etc etc)

3. The first video I saw from you YouTube channel, showed a ring with some copper/brownish hues within it. Is this “luck of the draw” or can this colour be ordered?

4. What’s the production period? Or can this vary based on production?

5. Random question here….other than Meteorite, I can see you have other substrates and materials. Am I am able to challenge you with a mixture? I have something in mind and would like to discuss…

Looking forward to hearing from you…

Cheers

by Kael on March 03, 2019

Love what your doing your such a inspiration to me because you take sum thing that’s boring and tern it into a buttifull pice of art

by Ajani Miller on March 02, 2019

I really adore your rings I watch you on YouTube as soon as you make a new video…. Just wish I had the cash to support your business..

by Bob on February 21, 2019

Wow nice rings!!

by ANONYMOUS on February 18, 2019

CAN YOU MAKE A CUSTOMIZE YOUR OWN RING AREA PLEASE. THAT WOULD BE REALLY COOL.

by Andy Le on February 18, 2019

Patrick, I had been watching your channel for 3 years and I had never seen you do a tungsten ring

by Moody on February 17, 2019

Instead of getting a class ring from school I want one from you with my class year engraved and my name or initials, but I also want something electric like a nfc chip that would be cool, I want it to be a big ring to

by SALOMON SOLER on January 24, 2019

Asome

by Selena on January 23, 2019

Hi there! I am interesting in getting one of your rings, however I’m just curious about the average shipping time it takes for rings to be delivered. I like in Canada. Please let me know! Thanks

by Franz on January 21, 2019

I’m 17 year old from Philippines and I really really love your videos! It’s fascinating to see how you made the rings. I really want to buy any of those but I can’t afford it.

by BRYAN on January 16, 2019

omg me to

by Jose Oregon on January 13, 2019

Hi I’m currently in Highschool and instead of getting a class ring, I was looking into getting one of your rings, but I do have a few questions. 1) Is it possible to have something ingraved on them (class year)? 2) Do you make custom rings (class rings)? 3)Are the rings wedding rings, or are they regular rings? 4) How long is the shipping ?

by Bunnylover_bluegirl on January 13, 2019

I love your rings! They are just so amazing! All the details are intricately placed in such a way that gives our eyes great pleasure!

by Valeria on January 13, 2019

Love your videos I’m a 13 year old who loves rings but can’t afford any

by Storm on January 12, 2019

Im a kid from The Netherlands who wants a ring for his dad ;) But it is to expensive

by Aayan on January 12, 2019

I’m just an 11 year old kid who wants a ring for show

by Infinite xDenziix on January 10, 2019

I’m only an 11 year old kid who is looking for a ring that can fit me

by minecraft master on January 09, 2019

i am just a kid

by Rix Devore on December 27, 2018

Very nice rings, videos, etc… And thought I’d mention I watch them to the end, I don’t want to miss anything. I do have an odd question for you. How hard would it be to put the trillium vial or glow powder under a gemstone so that it would glow? I think I understand. How to do it but am unsure about it’s difficulty? Thanks…

by Mark on December 17, 2018

Do you deliver to the uk? If so, how much is it please?

by Jesus montano on December 16, 2018

I want a chakra ring size 9.5 but how much will it cost

by Connor on December 16, 2018

Hi! I was going to get one of these rings instead of a (bulky) class ring, and want to know if the ingraving is or could be on the inside of the ring band?

by bismark on December 14, 2018

please i want some but i want to know the price first

by DR on December 07, 2018

Like your ring designs. Would like to order one but I wear a size 16. Any possibility of getting one custom made?

by dj gilbert on December 03, 2018

can you make me and my fiance our engament rings please

by Grace on November 28, 2018

Hi. I would really want to purchase a ring but however, my ring size is a US3.5 Eur45/46. Do you have such small sizes?

by Link on November 18, 2018

You truly are a master at your art. I’ve never been so interested in watching something come to life like your rings. Thank you for sharing what you do with us.

by David Autry on November 12, 2018

Wow, I just watched a few videos and it is truly amazing watching the process. I’ve never wanted anything so much in my life, I love the glowstone blue meteorite. Unfortunately I am currently unemployed and struggling to say the least but as soon as I can I will be placing an order. Looking forward to more videos. Awesome work, have a great day.

by ian on November 03, 2018

thank you for wanting to get others involved it really feels nice that you are trying to help people who maybe don’t have the tools. I know that I enjoy every one of your videos.
Thank you

by TJ on November 02, 2018

i’m a big guy and i have big hands and i am interested in buying a ring from u. but my ring size is 3.5 inch on my right hand. what would that be in size. That is if it can be done never seen one so big

by Jan on October 31, 2018

Amazing rings Patrick. And of course I have an in-between ring size. I am 72 mm. So better take 13.5.
Order inbound before the end of the year.

Cheers.

by Darick Nelson on October 29, 2018

This is amazing, i have always wanted to craft something spectacular out of materials. i am so glad i came across your youtube channel, i have learned so much just by watching your videos.

by Troy Frizzell on October 25, 2018

I really like the ring you showed on youtube the Making a Tritium and Damascus Glow Ring. Is there any way you could make me one?

by Ray Anthony Michaud on October 21, 2018

WOW!!! I do not know how I came across your youtube video but I am super glad I did. I have been watching the videos of you making these rings all day. You have an amazing skill and talent. You can expect to see an order for a Sunken Artifact Glowstone in Auqa or Blue soon. I’m still undecided on which lol. Keep on creating A+++

by Robert on October 06, 2018

Hi Patrick, I love your work and your videos on youtube, are you ever going to do a wedding ring series?

by Tierra Brown on September 11, 2018

You should definitely do a wedding ring series.

by Quiterio on September 09, 2018

Bonjour Patrick, dommage que je n’ai pas de quoi m’acheter une de tes bagues. Car franchement elles sont trop magnifique. Si tu veut m’en offrir une je t’en remercie d’avance. Cordialement.

by Penny on September 07, 2018

Hi Patrick my name is penny and I dont have any money right now and I really want one. Can you send me one please

by Kevin on September 02, 2018

I’m curious can you go over a size 15?

by Jamesbyrns on August 25, 2018

Hey Patrick I watch a Videos and I don’t have enough money to get a ring so please send me one and if it’s possible can you say James Byrns on one of your next videos choices much as you can please

by Cera Mena on August 21, 2018

Hello,
I was wondering if you offer an eight and three quarter sized ring. If you do not offer this size what do you recommend I do? Thanks for your time and have a great day!

by Jeanine Noelle Kinney on August 19, 2018

Hello, I have a quick question. We are looking at a ring for my fiance, and we have a ring sizer…. It is showing he is a 10.5, but when we do the string, it is showing an 11…. What size should we go with? I want to make sure it fits and isn’t too big or small.

Thank you!

by daniel on July 21, 2018

Love the “blackout ring” but my middle finger is too big : more than 15.0 (exactly 2,99 inches > inside circumference)

Thank you for your vdo

by Brian Ritter on July 13, 2018

Love the superconductor ring and really just all buetiful work awesome job

by Tom on June 29, 2018

Do yo have sizes Larger than 15? I think the last time I was measured my ring finger was in the 16 to 16.5 range. I no longer wear a wedding ring because I’ve outgrown them. My wife would like to resolve that sometime in the near future.

by Josh on June 20, 2018

Love ur videos and all of ur creative idea’s. The rings are amazing, beautiful, and definitely brilliant artwork. I’m interested in a timascus with red, white and blue tritium. Is that possible and if you’ve made one already would you post a video so I could visually see the ring.
Thanks and keep up the good work.

by Allen Younger on June 19, 2018

I really love watching your video

by Robert on May 29, 2018

Just received my ring and it’s amazing. You did an outstanding job on it, I really appreciate it. You will be hearing from me in the future.

by Jeremy Stephens on May 26, 2018

What if my knuckles are big and my fingers are skinny? Will I be able to get a good fitting ring?

by Leoné on May 24, 2018

I would love to have a Damascus steel ring too. With an inlay can I choose different stones or are their only specific ones that can be used?

If I may ask do you do orders from overseas and how do you package and send it off to the recipients?

LEAVE A COMMENT

Please note, comments must be approved before they are published


BACK TO TOP
Ring Sizer Added to Cart!